Product name | TDS | Category | Packing | Consumption | Box pcs | Tray pcs | Manufacturing standard | |
|---|---|---|---|---|---|---|---|---|
Tinted oil for restoration of oiled and hardwax-oiled hardwood floors | Local repair and renovation products | 0.75 L | 5 – 10 ml/m² | 9 pcs. | 432 pcs. | TУ BY 101040134.002-2014 |
Readiness condition | Time to dry | Shelf life | Storage and transportation conditions |
|---|---|---|---|
Ready to use | For light loads (walking) — 12 hours in a well ventilated room. Time before using floors is not less than 24 hours. Maximal protective characteristics are available in a week. | 12 months | Keep tightly closed at temperature +5°С to +25°С. Keep container dry. Avoid direct sunlight and exposure to temperatures below +5°С. |
Tinted oil for restoration of oiled and hardwax-oiled floors is developed specifically for restoration of the wear layer of wooden surfaces (hardwood flooring, furniture, stairs, wall panels) finished with any oil-containing finishes (natural oils, hardwax-oil, UV-oil).
The oil creates a thin oil-soaked wear and tear resistant layer on wooden surfaces. Gives a water- and soil-repellent features to the surface.
Micronized pigments from tinted oils restore the overall tone of the wooden surface while keeping the texture intact.
It is used when the hardwood flooring surface looks too “dry” (rough) or the main finish was worn off due to the heavy loads.
Manual care
Preliminary works:
Clean the floor from sand, dust and litter using a vacuum-cleaner.
Clean the floor with the hardwood flooring cleaner. Avoid overwatering, the flooring has to be dry in 2-3 minutes after cleaning
It is recommended to provide the following climatic conditions: temperature from +18°С to +25°С, relative air humidity 40 – 60 %. It is necessary to ensure the good air flow during the whole application and drying process.
Apply the oil to the flooring surface with a resin trowel, a brush with rough bristles or a simple brush. Distribute the tinted oil evenly.
After application, rub the oil on the surface with clean cotton rags.
Remove the oil excess to avoid heavy stains and beads.
Mechanical care
Apply the oil to a renovated flooring surface with a resin trowel, a brush with rough bristles or a simple brush. Distribute evenly.
Remove the oil excess to avoid heavy stains and beads.
After the application, rub the oil using a single-disk white pad buffing machine.
FLOORING CARE:
We recommend to use Coswick cleaners for oiled and hardwax-oiled hardwood floors.
TOOLS CLEANING:
Tools and dry oil remains can easily be cleaned with white spirit.
