Reference | TDS | Product name | Gloss | Category | Packing | Consumption | Box pcs | Tray pcs | Manufacturing standard | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
4200-024000 | Renewer oil for oiled and hardwax-oiled hardwood floors | Ultramatte | Local repair and renovation products | 0.75 L | 5 – 10 ml/m² | 9 pcs. | 432 pcs. | TУ BY 101040134.002-2014 |
Color | Time to dry | Readiness condition | Shelf life | Storage and transportation conditions |
|---|---|---|---|---|
Gray liquid | For light loads (walking) – 12 hours in a well ventilated room. Time before using floors is not less than 24 hours. Maximal protective characteristics are available in a week. | Ready to use, does not need to be dissolved | 12 months | Keep tightly closed at temperature +5°С to +25°С. Keep container dry. Avoid direct sunlight and exposure to temperatures below +5°С. |
Renewer oil for oiled and hardwax-oiled hardwood floors Ultramatte is developed specifically for periodic renovation of hardwood flooring, furniture, stairs, wall panels finished with any oil-containing finishes (natural oils, hardwax-oil, UV-oil) and restoration of protective properties.
The oil creates a thin oil-soaked wear and tear resistant film on wooden surfaces. It gives a water- and soil-resistant features to the surface.
The renewer oil is used when the hardwood flooring surface looks too “dry” (rough) or a main finish was worn off due to the heavy loads.
Periods of renovation depend on type of the facility and its’ loads:
| Room type | Finish type | ||
|---|---|---|---|
| UV-Oil | Hardwax-oil | ||
| Living rooms | Once in 3-5 years | Once in 1-2 years | |
| Public places | Low and average loads | Once in 3-6 months | Once in 1-2 months |
| Heavy loads | Once in 1-2 months | Once in 2 – 3 weeks | |
Manual care
Preliminary works:
Clean the floor from sand, dust and litter using a vacuum-cleaner.
Clean the floor with the hardwood flooring cleaner. Avoid overwatering, the flooring has to be dry in 2-3 minutes after cleaning
It is recommended to provide following climatic conditions: temperature +18°С to +25°С, relative air humidity 40 – 60%. It is necessary to ensure a good air flow during application and dry-out.
Apply the oil to a renovated flooring surface with a resin trowel, a brush with rough bristles or a simple brush. Distribute evenly.
When applied, rub the oil with clean, non-colored rags, remove the oil excess to avoid heavy stains and beads.
Automatic care
Apply the oil to a renovated flooring surface with a resin trowel, a brush with rough bristles or a simple brush. Distribute evenly.
After the application, rub the oil using a single-disk white pad buffing machine.
FLOORING CARE:
We recommend to use Coswick cleaners for oiled and hardwax-oiled hardwood floors.
TOOLS CLEANING:
Tools and dry oil remains can easily be cleaned with white spirit.
